RONIN-2
FEATURES
- The most versatile professional three-axis stabilization system
- Carbon fiber monocoque structure
- High torque motors that support chambers up to 30 lbs
- Fine balancing for precise control
- Self-heating and hot-swapping batteries
- On-board power for camera and accessories
- Integrated camera controls
- Integrated GPS and compatible with DJI A3 flight controller
RONIN
![](https://grip-crew.net/wp-content/uploads/2017/05/RONNIN2-1-600x532.jpg)
CHALECO READY RIG
![](https://grip-crew.net/wp-content/uploads/2017/05/ChalecoReadyRig2-1.jpg)
MINI SCORPIO EZ
FEATURES
- 2 axis remote head for video, film and HD cameras.
- Booth Axis have a central hole: 50mm (2″) Pan and 70mm (2,7″) Tilt for passing cables through them.
- Mini Scorpio EZ Head can be controlled from up to 500 meters by cable serie RS485 or by wireless half-duplex microwave 2,4GHz
- All accessories from the Scorpio Classic Head, Scorpio Stabilized Head, Scorpio Focus, Mini Scorpio Head and Micro Scorpio Head are compatible
- Using the new EZ Control (without display):
- Limit, speed and Damping adjustment available.
- Using Standard Scorpio Control from Classic, Mini or Stabilized Head:
- 1 connection for Scorpio Focus or others lens control systems.
- If you use the Scorpio Focus, all axis (Pan, Tilt, Roll, Focus, Iris and Zoom) are programmable and repeatable
- Limits programmable, damping and speed adjustment for all axis available
- 3 control system are available: JDR (Pan Bar), Joystick and Handwheels.
- All information transferable to a computer by 232
Weight
13,5KG
Max. load
45KG
Pan Tilt 360 degrees
Power from battery or power supply 24 V to 35 V
1 connection for Scorpio Focus or others lens control systems
Max. speed in all axis 2,5 sec. for 360 degrees
SCORPIO CLASIC
FEATURES
- 2 and 3 axis remote head for video, HD and film cameras.
- Scorpio Classic Head can be controlled from up to 500 meters by cable serie RS485 or by wireless half-duplex microwave 2,4GHz. designed by Servicevision.
- All axis (Pan, Tilt and Roll, and Focus, Iris and Zoom if you use the Scorpio Focus) are programmable and repeatable. The system has a bank of 6 memories of 2 minutes each one. In this memories you can modify each axis independent.
- Is possible to transfer all memories to a computer true serial channel 232
- Is available the option to determinate 4 started positions
- Limits programmable, damping and speed adjustment for all axis available
- 3 control system are available: JDR (Pan Bar), Joystick and Handwheels.
- The Joystick includes Focus and zoom control directly connected to the Zoomlens true the Servo Video Lens.
- Pan and Roll axis have 2 slip rings inside. This slips rings allows to have a movement of 360º continuously:
- 1 to transfer all comunication, power, video and auxiliary signals true gold contacts
- 1 to transfer Triax signal
- Power supply for all film and video cameras
- All accessories from the Mini Scorpio Head, Scorpio Stabilized and Scorpio Focus are compatible with Scorpio Classic Head
- The head provides 2 different risers (10cm, and 20cm) to change the size of the head.
- Is possible to work under slung and over slung
Weight in 2 axis
24KG
Payload in 2 axis
60KG
Power from battery or its own power supply: 24V to 35V /10A
2 Outputs 12V/12,5A for camera power
1 Output 26,7V/12,5A for camera power
Pan, Tilt and Roll speed : 3sec./1 rev.
Perpetual motion 360º in Pan, Tilt and Roll
Slip rings in Pan and Roll with:
- 2 video signal
- 1 triax signal
- 10 auxiliar contacts 2 A
- 1 connection for lens control